Beams and columns are among the longest, heaviest, and most swing-prone loads in structural steel work. Their length amplifies the pendulum effect, their mass carries significant momentum, and their final positioning — onto mounting plates, through bolt holes, into connection points — requires precise alignment that workers have traditionally achieved by hand.
Why Beam Geometry Suits the 90° Flex Head
H-beams and I-beams present consistent flange geometry lift after lift. The approach angle for engaging a beam flange is essentially the same for every beam of the same section size. This predictable geometry is exactly what the 90° Flex Head's controlled articulation envelope is designed for: a bounded working range that reinforces a safe, repeatable engagement pattern for structural work.
Rotation Control for Beam Landing
Beams frequently need rotational correction as they approach their connection points — turning the section to align bolt holes, or rotating a column to present the correct face to a splice plate. This rotational correction is most effectively applied through the magnetic face at the beam flange, offset from the beam's suspension point to generate the required moment. The 90° Flex Head's free magnetic rotation allows the operator to apply this correction while walking beside the beam without breaking magnetic contact.
Working at Height
Structural steel erection often involves positioning beams at height. At elevation, the operator's movement options are constrained by the working platform. Tool length selection must account for this: the FG008 telescopic pole allows the working length to be adjusted to what the platform space permits.
Structural steel in the field carries mill scale, site primer, and weathering. Verify magnetic attachment on the actual beam surface, not based on the previous beam in the same batch — surface condition varies significantly between sections and between deliveries.
Premium Engineering Consultation
Not sure which configuration fits the task?
PSC's Application Mapping Review examines the actual task — the load, the surface, the access conditions, and the operator's movement — and recommends the correct matched configuration.
Request a Load-It® Application Mapping Review Load-It® System →